Per metre
The quoted amount relates to running length. Confirm whether it covers one fin, one configured product line or a defined assembly.
Alubreeze pricing and selection guide
Alubreeze - Metal Sun Louver Price Guide
Our Alubreeze - Metal Sun Louver pricing depends on the selected configuration, fin dimensions, approved length, angle, orientation, spacing, finish, quantity and quoted scope. We use metre-based price references for preliminary planning, while the final quotation confirms whether brackets, channels, support framing, fabrication, freight, taxes and installation are included. We recommend comparing the complete quoted scope rather than only the visible fin rate.
We also account for building height, access, wind-load inputs, engineering, drawings and site conditions when preparing a metal sun louver quotation. Two Alubreeze quotations may differ because they use different Single or Double configurations, finishes, blade layouts or installation scopes. For an accurate quotation, share the façade dimensions, orientation, spacing, preferred width and angle, finish, project city and required component and installation scope.
For ordering, we recommend a project-specific quotation based on the confirmed specification, quantity and scope.
Metal Sun Louvers Price
Alubreeze - Metal Sun Louver Price 2026
For preliminary budgeting, we use the following indicative per-running-metre references. We confirm the final Alubreeze price after reviewing the selected configuration, dimensions, finish, quantity, components and project scope.
₹2,500-₹3,500/running metre*Alubreeze Single Fin indicative range
₹3,500-₹4,500/running metre*Alubreeze Double Fin indicative range
Pricing unit: running metreUse for preliminary budgeting; confirm the final quoted scope
| Alubreeze configuration | Price range | Pricing unit | Commercial interpretation |
|---|---|---|---|
| Alubreeze Single Fin | ₹2,500-₹3,500* | Per running metre* | Indicative product-price reference. We confirm width, finish, quantity and included component scope in the project quotation. |
| Alubreeze Double Fin | ₹3,500-₹4,500* | Per running metre* | Indicative product-price reference. For Fixed or Double Alubreeze, we confirm profile depth, control scope and included components in the project quotation. |
Pricing note: *These figures are indicative per-running-metre references for preliminary budgeting, not installed-system rates. We confirm whether brackets, accessories, assembly channels, support framing, fabrication, installation, scaffolding, freight, unloading, taxes, intelligent controls/actuation and special requirements are included in the project quotation. Prices may be revised. We recommend confirming the specification, quantity, pricing unit, inclusions, delivery location and quotation validity before ordering.
Quick answer
What should buyers understand about Alubreeze pricing?
We present Alubreeze - Metal Sun Louver prices as indicative per-running-metre references, not as installed-system rates. We confirm the final metal sun louver price against the selected Single, Double Fixed or Double Intelligent configuration, approved blade layout and quotation scope, including the blades, brackets, channels, support, fixings, finish, delivery, controls where applicable and installation.
Product definition
What is Alubreeze?
Alubreeze is our metal sun louver system made with roll-formed, pre-coated aluminium fins. Our current Single Alubreeze range includes fixed straight and angled configurations, horizontal or vertical installation, fin widths from 100 mm to 300 mm, and fixed positions of 90°, 30° and 45°.
We offer Alubreeze for solar shading, façade screening, architectural rhythm, depth, partial privacy, service-area screening and elevation enhancement. The actual outcome depends on fin angle, orientation, spacing, projection, façade direction, sun path, window geometry, surrounding obstructions and project-specific analysis.
Explore our Alubreeze metal sun louver system for the broader product overview; use this page for pricing, quantity and quotation planning.Single Fin Alubreeze Reference
- Roll-formed pre-coated aluminium fins
- 100 mm to 300 mm width range
- 0.70 mm fin skin; optional 1.00 mm subject to MOQ
- Fixed straight, 30° fixed and 45° fixed options
- Horizontal or vertical installation
- Fin length from 1,000 mm to 4,000 mm, subject to wind-load design
- PVDF, SDP and FEVE surface coating options
Profiles, dimensions and finishes
Single Fin Alubreeze Profile Reference
Our Single Alubreeze range extends to 300 mm. The product codes shown below cover the 100-250 mm configurations listed here; for a 300 mm fin, we will confirm the applicable code and price in the project quotation.
| Configuration | 100 mm | 150 mm | 200 mm | 250 mm | Price status |
|---|---|---|---|---|---|
| Straight fixed / 90° | AL10000 | AL15000 | AL20000 | AL25000 | Indicative Single Fin range applies; we confirm the width- and finish-specific quotation |
| Angle fixed / 30° | AL10030 | AL15030 | AL20030 | AL25030 | We confirm the current width- and finish-specific quotation |
| Angle fixed / 45° | AL10045 | AL15045 | AL20045 | AL25045 | We confirm the current width- and finish-specific quotation |
Pricing-unit explanation
How to read our metre-based price references
We present the aluminium louvers price and metal sun louver price as per-running-metre references. We do not convert them into another unit because blade spacing and layout determine the total running length.
Not an area rate
Per-metre pricing is not the same as per-square-metre pricing because blade spacing creates gaps and changes total running length.
Not an installed rate
Per-metre pricing is not the same as per-square-metre pricing because blade spacing creates gaps and changes total running length.
Price factors
What changes an aluminium louver quotation?
The aluminium louvers price can vary even when two projects use the same overall façade area. The metal sun louver price depends on the actual running length, configuration and system scope rather than area alone. The visible aluminium louvers price may not represent the total installed cost. Likewise, a metal sun louver price cannot be compared fairly until both quotations use the same blade, spacing, components and installation assumptions.
Fin and finish
- Single, Double Fixed or Double Intelligent configuration
- Fin width and angle
- Approved length and thickness option
- PVDF, SDP or FEVE coating
- Colour, texture and MOQ
Layout and engineering
- Vertical or horizontal orientation
- Centre-to-centre spacing
- Number of fin lines and span
- Building geometry and height
- Wind-load and support review
Commercial scope
- Brackets, channels and framing
- Fabrication and site cutting
- Access equipment and labour
- Packaging, freight and unloading
- Taxes, mock-ups and documentation
- For Intelligent Double Fin: control, actuation, sensor, BMS/API and commissioning scope
Price versus project cost
Product price and complete installed-system cost are different
We treat the indicative aluminium louvers price as a product reference, not as a complete façade-system or installed-project price. We confirm the final system scope and commercial inclusions in the project quotation.
Product reference
The indicative Single or Double Alubreeze per-running-metre range shown on this page.
Material package
May include fins and selected brackets, channels, fasteners, connectors or end components; verify line by line.
Delivered material
May add packaging, freight, unloading and delivery terms to the project location.
Fabricated component
May add cutting, drilling, splices, connectors and preparation to approved dimensions.
Installed system
May add framing, labour, access, lifting, site assembly, supervision, drawings, engineering and maintenance access.
Product Photos
Alubreeze metal sun louver applications
Browse façade, balcony, pergola, canopy and overhead-shading applications. The final blade size, angle, spacing, finish and support system must be selected for the actual project.
Illustrative example
Vertical Single Alubreeze feature: preliminary quantity and price reference
Assume a 6 m wide × 3.5 m high zone with vertical fins at 300 mm centre-to-centre spacing. Assume each approved fin run is 3.5 m and no additional allowance is applied.
- Approximate blade lines = 6 ÷ 0.30 = 20
- Total running length = 20 × 3.5 = 70 m
- Approximate 3.5 m pieces = 70 ÷ 3.5 = 20
- Indicative product price reference = 70 × ₹2,500-₹3,500
- Illustrative range = ₹1,75,000-₹2,45,000*
Important example assumptions
*This is an indicative product-price calculation, not a project quotation or installed cost. We confirm brackets, channels, framing, fabrication, freight, taxes, controls where applicable and installation separately through the project quotation. Final layout may require a different number of edge lines, joints, lengths or components. The aluminium louvers price and metal sun louver price must be confirmed after drawing review.
Design and orientation
How aluminium louvers design affects quantity and cost
Aluminium louvers design should respond to façade orientation, project objectives, viewing distance, building scale and support conditions. Blade width, depth, angle, spacing, projection, shadow line, colour, finish and window position can all change the layout and total running length.
Vertical orientation
Vertical fins can create a strong elevation rhythm and may be studied for east- or west-facing conditions. The final angle, spacing and projection require solar and structural review.
Horizontal orientation
Horizontal fins can form window bands, canopy-like shading features and layered façade lines. Run length, joints, supports and drainage interfaces require coordination.
Fixed angles
Our Single Alubreeze options include straight fixed, 30° fixed and 45° fixed arrangements. Angle selection changes sightlines, shading intent, component selection and appearance.
Application guidance
Planning Alubreeze for elevation and sun-control applications
The aluminium louvers price should be considered in the context of the intended application. The metal sun louver price alone does not confirm shading suitability, structural support or complete system scope.
Aluminium louvers for elevation
Alubreeze may be considered for commercial façades, office elevations, institutional buildings, retail projects, service screens, parking façades, entrances, window bands and rooftop-equipment screening.
- Review wind load, height, span and support spacing.
- Coordinate fixing, sub-frame, drainage and movement.
- Confirm exterior finish and maintenance access.
- Obtain consultant approval for the actual project.
Architectural sunshade louvers
Architectural sunshade louvers can be studied around windows, glazed façades, entrances, canopies and exposed elevation zones.
- Shading depends on orientation, angle, spacing and projection.
- Latitude, sun path and surrounding obstructions matter.
- Do not assume a guaranteed heat or energy reduction.
- Use project-specific solar and façade analysis where required.
Louver sun shade system
A louver sun shade system is more than the visible fin. It may require brackets, assembly channels, support framing, fasteners, connection details, drainage planning, drawings and installation coordination.
- Confirm which components the quotation includes.
- Review support interfaces and replacement access.
- Coordinate fabrication and site assembly.
- Compare complete scope, not the fin rate alone.
Sun louvers systems
Sun louvers systems can use different fin dimensions, spacing, finishes, component packages, installation methods and engineering assumptions.
- Normalise pricing unit and running length.
- Compare configuration and fin width.
- Compare supports, components and finish.
- Compare delivery, installation and approval scope.
Interior and exterior selection
Confirm exposure and coating before final selection
We offer Alubreeze for horizontal and vertical architectural applications, with PVDF, SDP and FEVE coating options for Single Alubreeze. Exterior projects require review of environmental exposure, cleaning access, support framing, thermal movement, wind and project approvals. Interior use still requires attention to impact risk, finish, support, fire requirements and maintenance access.
Our indicative aluminium louvers price is not split by coating, colour or interior/exterior use. We confirm the available finish, selected application and final metal sun louver price in the project quotation.
Do not select by appearance or rate alone
Fin size and spacing should be reviewed with span, support centres, substrate, building height, corner zones, connections and project location. Decorative fins must not be treated as structural members or weather barriers without verified design and approval.
Structural, wind and fixing guidance
Blade spacing and fixing require project-specific review
The aluminium louvers price can rise or fall with support spacing, bracket quantity, access and engineering. Our indicative metal sun louver price does not represent wind-load approval or a completed façade design; we confirm those requirements project by project.
Wind and span
Review wind pressure, suction, building height, corner zones, fin span, length and orientation.
Support and fixing
Coordinate substrate, assembly channels, brackets, fasteners, sub-frame, tolerances and thermal movement.
Professional approval
Use the responsible architect, façade consultant, structural engineer and other required professionals for approval.
Quotation comparison
How to compare Alubreeze quotations on a like-for-like basis
When comparing aluminium louver quotations, we recommend aligning the configuration, unit, running length and system scope before comparing the aluminium louvers price or metal sun louver price.
| Comparison item | What to verify | Why it changes cost |
|---|---|---|
| Configuration | Single, Double Fixed, Double Intelligent or another approved configuration | Our indicative ranges and final system scope differ by configuration. |
| Pricing unit | Confirm the metre-based unit and what one priced metre represents | Per-metre, per-piece and system prices cannot be compared directly. |
| Fin and layout | Width, thickness option, angle, orientation, spacing, length and quantity | These determine running length, components and support needs. |
| Finish | Coating, colour, texture, MOQ and exterior/interior suitability | Finish availability and project requirements may change the quotation. |
| Components | Brackets, plates, channels, end caps, splices, fasteners, connectors and controls where applicable | We confirm the included component scope in the project quotation. |
| Framework and installation | Sub-frame, fabrication, labour, scaffolding, lifting, drawings and supervision | Installed-system scope can be materially different from the product reference. |
| Commercials | Freight, unloading, packaging, taxes, payment, delivery and validity | These change landed and project cost. |
| Technical review | Wind, support, fire, façade interfaces and approvals | Project-specific engineering can change components and layout. |
Common buyer mistakes
Avoid comparing only the visible fin rate
Comparing metre and area rates directly
Corrective action: convert both offers to the same commercial unit and scope.
Focusing only on aluminium louvers price
Corrective action: compare configuration, components, framing, delivery and installation.
Assuming metal sun louver price includes installation
Corrective action: ask for separate product, fabrication, delivery and installation lines.
Ignoring blade spacing
Corrective action: approve the centre-to-centre layout before quantity and cost are finalised.
Estimating only from façade area
Corrective action: calculate blade lines and total running length.
Ignoring supports and brackets
Corrective action: confirm the component schedule and sub-frame design.
Selecting orientation without sun-path review
Corrective action: coordinate angle and orientation with project objectives and analysis.
Ignoring freight and taxes
Corrective action: confirm landed cost, unloading and applicable taxes.
Using a generic wastage percentage
Corrective action: derive allowance from approved lengths, joints, corners and the cutting plan.
Ordering before technical approval
Corrective action: finalise drawings, wind review, supports, finish and interfaces first.
Storage, handling and maintenance
Protect long fins and finished surfaces before installation
- Keep fins and components dry and supported along their length.
- Avoid dragging, twisting, bending or point loading.
- Separate finished surfaces and protect them from site damage.
- Check colour, finish and batch before installation.
- Retain safe access for future cleaning and inspection.
- Use approved cleaning guidance and avoid abrasive materials.
Fire and façade safety
Alubreeze selection may require review of product composition, supporting components, façade cavities, building type, fixing, interfaces with other materials, local regulations and consultant requirements. This page does not claim a fire rating, structural approval or system compliance.
Buyer checklist
Information to confirm before requesting the final Alubreeze quote
Project and layout
- Application and location
- Building type and height
- Façade orientation
- Installation width and height
- Vertical or horizontal fins
- Blade angle and spacing
- Drawings and mock-up
Product and components
- Single, Double Fixed or Double Intelligent configuration
- Fin width and thickness option
- Approved fin length
- Finish and colour
- Brackets and channels
- End components and splices
- Support framing and fixings
Commercial and approval
- Total running length and quantity
- Fabrication and installation
- Scaffolding and access
- Freight, unloading and taxes
- Delivery timeline and validity
- Wind and fire requirements
- Technical and consultant approval
Continue product and pricing research
Need a current Alubreeze project quotation?
Share your drawings, dimensions, orientation, blade spacing, preferred configuration, finish, quantity and required system scope.
Request for Alubreeze QuoteFAQs